High-Flow RO
Everpure MDRO-1600 (240 LPH)
The Everpure MDRO-1600 is a powerful 240 LPH reverse osmosis system designed for cafés, QSRs, tea shops and cloud kitchens that need stable, low-TDS water across multiple equipment points. It acts as a single high-flow backbone for your store’s most critical water needs.
Why It Matters
Key Benefits
Pure Water for the Whole Store
With a rated flow of 4 LPM (about 240 LPH), MDRO-1600 can feed coffee machines, tea brewers, ice makers, combi ovens and more from a single RO backbone—keeping quality consistent at every station.
Protects Taste & Equipment
Multi-layer composite cartridges and RO membranes reduce heavy metals, organic compounds and chlorine, helping extend equipment life while delivering cleaner-tasting beverages and clearer ice.
Smart & Easy to Operate
Built-in bypass valve, visible TDS/flow information, filter-life reminders and support for IoT remote management make day-to-day operation simple, predictable and easier to troubleshoot.
Everpure MDRO-1600 is ideal for cafés, specialty coffee bars, tea and bubble-tea shops, bakeries, QSRs and cloud kitchens where multiple dispense points share one RO system. Wherever ingredient water quality directly affects taste and uptime, MDRO-1600 fits.
Hard water, scaling, drifting TDS and unexpected downtime quietly erode margins. MDRO-1600 stabilises your water quality, helps protect expensive equipment and gives you one intelligent system to manage instead of many scattered filters and small ROs.
| Parameter | Details |
|---|---|
| Filtration Capacity | Rated total volume of purified water: 12 m³ (≈ 12,000 L) |
| Micron Rating | Not applicable – reverse osmosis membrane (molecular-level filtration, not expressed in microns) |
| Flow Rate | Rated water purification flow rate: 4 LPM (≈ 240 LPH) |
| Dimensions (L × W × D) | Approx. 320 W × 268 D × 708 H mm |
| Operating Pressure | Recommended inlet pressure: 0.1 – 0.4 MPa • Operating pressure: 0.6 – 0.9 MPa (≈ 6 – 9 bar) |
| Operating Temperature | Feed water temperature: 5 – 38 °C |
| Connections | 3/8" inlet & outlet (quick-connect); built-in bypass ball valve; typically wall-mounted or installed on a dedicated bracket with storage tank and pre-filtration. |
| Certifications | Water Efficiency Rating: Level 1 (tested to GB/T 30307-2023 indicators). Additional health and performance testing performed by Pentair and accredited regional laboratories. |
| Application | High-flow RO purification for multi-point foodservice and retail applications requiring consistent, low-TDS ingredient water (Everpure MDRO-1600: 240 LPH). |
Related Products
Everpure MDRO-800 (120 LPH)
- Capacity: Rated total volume of purified water: 9 m³ (≈9,000 L)
- Micron Rating: Not applicable – reverse osmosis membrane (molecular-level filtration, not expressed in microns)
- Flow Rate: Rated water purification flow rate: 2 LPM (≈120 LPH)
- Connections: 3/8" inlet & outlet (quick-connect); built-in bypass ball valve; typically wall-mounted or on a dedicated bracket.
- Certifications: Water Efficiency Rating: Level 1 (tested to GB/T 30307-2023 indicators). Additional health and performance testing performed by Pentair and regional labs.
Pentair 25 LPH RO System
- Capacity: Not specified
- Micron Rating: Not applicable – RO membrane
- Flow Rate: 25 LPH
- Connections: 3/8" quick‑connect (typical RO)
- Certifications: Not specified
Designing a high-flow RO backbone for your store?
Talk to Aquainwent about sizing, pricing, and installation for your site.
