Home About Us Products Why Everpure For Dealers Blog Contact Request Site Assessment
HomeProductsPentair CartridgesPentek EP Series Carbon Block Cartridges
Carbon Block Filtration

Pentek EP Series Carbon Block Cartridges

Pentek EP Series carbon block cartridges

EP Series cartridges are **nominal 5-micron carbon briquettes** with a high-porosity design and Endurawrap® pre-filter. They reduce chlorine taste & odour and fine sediment while maintaining low pressure drop, making them ideal as polishing or pre-filters in residential, foodservice and light-commercial systems.

Nominal 5 µm
High dirt-holding capacity
Endurawrap pre-filter
NSF/ANSI 42 (material)
Not sure it fits your site? Request a free water assessment →
Why this product

Solve the Real Problems

Chlorine taste, odour and fine sediment can make water unappealing and clog downstream filters. EP Series cartridges tackle both in a single element—helping systems run cleaner with fewer call-backs.

Effective Taste & Odour Improvement

Bonded PAC carbon significantly reduces chlorine taste & odour and general bad tastes, helping water taste cleaner and more appealing.

High Dirt-Holding Capacity

The high-porosity carbon and gradient-density structure allow the cartridge to hold more sediment before plugging, extending service life.

Protected by Endurawrap®

A polyolefin bilaminate pre-filter wraps the block to trap coarse particles first, protecting the carbon core and maximising utilisation.

Built for

Where this system fits

🏢

Residential POE/POU

🏢

Foodservice

🏢

RO Systems

Key features

What's inside Pentek EP Series Carbon Block Cartridges

✅ Best for

  • {{BEST_FOR}}

🔧 Check before ordering

  • {{CHECK_BEFORE}}

Not sure about your water quality or sizing? Request a free site assessment →

Specifications

Technical Specifications

Capacity Model-dependent chlorine taste & odour reduction capacity (approx.): EP-10 > 6,000 gal @ 1 gpm; EP-20 > 12,000 gal @ 2 gpm; EP-BB > 22,000 gal @ 2 gpm; EP-20BB > 40,000 gal @ 4 gpm (90%+ reduction at
Rating Nominal 5 µm (per manufacturer internal testing).
Flow Rate Model-dependent. Typical service flows for chlorine reduction: EP-10 – 1 gpm; EP-20 – 2 gpm; EP-BB – 2 gpm; EP-20BB – 4 gpm (max 5 gpm for EP-20BB).
Dimensions Standard: EP-10 2.88" × 9.75" (73 × 248 mm); EP-20 2.88" × 20" (73 × 508 mm). Big Blue: EP-BB 4.63" × 9.75" (118 × 248 mm); EP-20BB 4.63" × 20" (118 × 508 mm).
Operating Pressure Not specified (use within the pressure rating of the installed housing; observe pressure-drop guidelines).
Operating Temperature 40–180 °F (4.4–82.2 °C).
Connections Drop-in cartridges for standard 2.5" and 4.5" housings (10", 20" etc.). No direct threaded connection.
Certifications EP-10, EP-20, EP-BB and EP-20BB tested and certified by NSF International to NSF/ANSI Standard 42 for material requirements only.
Applications Chlorine taste & odour and fine sediment reduction for residential, foodservice, commercial and industrial water treatment systems.
Same category

More Pentair Cartridges

Need help selecting the right EP cartridge?

Share your water quality and demand — our engineer will recommend and size the right system, free of charge.