Higher-flow capacity
Dual 7CB5 cartridges support up to 5.0 gpm for demanding steam applications.
Everpure by Pentair
Commercial Steam Treatment
ScaleStick · NSF/ANSI 42 materials
Everpure Kleensteam Twin
for high-flow steam protection, built to reduce scale.
A dual-cartridge commercial steam-treatment system for combi ovens and steamers, combining filtered boiler water, HydroBlend scale inhibition and direct ScaleKleen deliming support.
Site assessment
Installation guidance
Genuine cartridge support
AMC planning
Key Benefits
What this system helps you achieve
Scale inhibition
HydroBlend compound helps reduce limescale formation in high-temperature equipment.
Corrosion support
Carbon filtration helps reduce chlorine-induced corrosion and incoming sediment.
Simplified deliming
ScaleKleen can be fed through the SR-X bowl without boiler disassembly.
Application Fit
Is it suitable for your site?
Best for
- Commercial combi ovens and high-volume steamers
- Institutional and production kitchens
- Applications requiring up to 5.0 gpm boiler-water flow
- Sites needing capacity for current demand and future equipment expansion
Check before ordering
- Minimum 1/2 inch inlet water line; 3/4 inch preferred
- Water pressure within 10–125 psi, non-shock
- Water temperature from 2–38°C
- Space for approximately 64.7 × 52.0 × 17.7 cm system and 3/4 inch FNPT connections
| Product Name | Everpure Kleensteam II Twin System |
|---|---|
| System Part Number | EV979722 |
| Application | Commercial steamers and combi ovens |
| Rated Capacity | 20,000 gallons, approximately 75,708 litres |
| Service Flow Rate | 2.5 gpm with one cartridge or 5.0 gpm / 18.9 LPM with dual cartridges |
| Operating Pressure | 10–125 psi / 0.7–8.6 bar |
| Water Temperature | 2–38°C / 35–100°F |
| Overall Dimensions | 25.5″ H × 20.5″ W × 7″ D / approximately 64.7 × 52.0 × 17.7 cm |
| Connections | 3/4 inch FNPT inlet and outlet |
| Replacement Cartridges | Two 7CB5 cartridges EV961811 and SS-10 EV979902 |
| Electrical Connection | None required |
| Certification | ScaleStick component: NSF/ANSI Standard 42 for materials |
Trust Signals
Backed by brand credibility, certification and local support
Everpure by Pentair channel confidence
Aquainwent supports Everpure commercial steam-treatment systems across India.
NSF/ANSI 42 materials
The ScaleStick component carries the applicable materials certification.
Warranty and installation support
Commercial terms and installation scope are confirmed through official quotation and invoice policy.
Dual-cartridge service planning
Aquainwent can help plan 7CB5 replacement, ScaleStick replacement, deliming and AMC support.
Everpure by Pentair systemsFoodservice water applicationsInstallation guidancePan-India service support
Why This Model
When Kleensteam Twin makes sense
A dual-cartridge system for larger steam applications that need higher flow, longer rated capacity and flexibility for current or future equipment demand.
1
Dual-cartridge performanceSupports up to 5.0 gpm and 20,000 gallons of rated capacity for demanding boiler-water service.
2
Expandable application fitThe design supports low- or high-flow steamers and offers flexibility as kitchen requirements grow.
3
Integrated maintenance routeCombines quick cartridge service, HydroBlend scale inhibition and ScaleKleen deliming access.
ProcessFrom water check to
From water check to
ongoing support
Share steam demand
Equipment models, simultaneous flow, water report and site layout.
Verify capacity and plumbing
Confirm line size, pressure, flow, dimensions and installation clearance.
Install and flush
Install vertically, connect to boiler water and flush cartridges at full flow.
Maintain proactively
Replace 7CB5 cartridges on schedule and SS-10 before HydroBlend is exhausted.
Customer Confidence
Built for commercial operations teams
Higher-volume readiness
Dual cartridges support demanding combi and steamer water demand.
Equipment protection
Filtration and scale inhibition support boiler surfaces and operating efficiency.
Lifecycle support
Aquainwent can coordinate cartridge, deliming and AMC planning.
Kleensteam Twin is designed for higher-flow steam applications, with dual cartridges, up to 5.0 gpm flow and 20,000 gallons of rated capacity. CT is the compact lower-flow option.
Pentair recommends a regular six-month preventive maintenance program, or replacement when capacity is reached or pressure and flow become inadequate. SS-10 should be replaced before the HydroBlend compound is fully used.
The specification identifies 2.5 gpm with one cartridge and 5.0 gpm with dual cartridges. Final operation should follow the installed configuration and Pentair guidance.
Use a minimum 1/2 inch inlet water line, with 3/4 inch preferred, and connect through the system’s 3/4 inch FNPT inlet and outlet.
The ScaleStick component is certified under NSF/ANSI Standard 42 for materials.
Not sure if Kleensteam Twin fits your application?
Share your water quality, equipment details and site location. Aquainwent will help verify whether Everpure Kleensteam Twin is the right Everpure by Pentair solution.
