Whole-home protection
Treats water for showers, kitchen taps, appliances and other household points from one system.
Pentair
UV + Micro Filtration
Whole-Home 75 LPM
Pentair UV75 Ultraviolet Micro Filtration System higher-capacity Multi-stage filtration and UV for every tap.
A 75 LPM whole-home ultraviolet micro-filtration system combining dual-gradient sediment pre-filtration, carbon treatment and UV beverage-equipment operation.
Site assessment
Installation guidance
Genuine cartridge support
AMC planning
Key Benefits
What this system helps you achieve
Sediment control
Dual-gradient pre-filtration helps reduce silt and suspended particles before carbon and UV stages.
Taste and odour treatment
Carbon stages help reduce chlorine, colour, chemicals, bad tastes and odours.
High-confidence UV stage
Ultraviolet treatment adds a chemical-free microbiological barrier after filtration.
Application Fit
Is it suitable for your site?
Best for
- Medium-to-large houses requiring up to 75 LPM
- Rainwater, bore-water or treated municipal supplies after assessment
- Whole-home treatment for multiple taps and appliances
- Sites needing sediment, carbon and UV treatment in one system
Check before ordering
- Working pressure: 210–500 kPa
- Water temperature: 5–38°C; cold water only
- 25 mm, 1 inch BSP inlet and outlet
- Confirm source-water quality and cartridge or UV service acces
| Product Name | Pentair UV75 Ultraviolet Micro Filtration System | Application | Whole-home ultraviolet micro filtration for rainwater, bore water or treated municipal supplies in medium-to-large houses. |
|---|---|
| Filtration Rating | Approximately 1 micron nominal dual-gradient pre-filtration, followed by carbon treatment and UV disinfection. |
| Capacity | Cartridge life up to 12 months under typical residential conditions; actual life depends on water quality and use. |
| Flow Rate | Maximum flow rate: 75 LPM. |
| Dimensions | Approximately 721 W × 780 H × 218 D mm. |
| Operating Pressure | Working pressure: 210–500 kPa, approximately 30–73 psi. |
| Operating Temperature | Water temperature: 5–38°C. Ambient temperature: 2–49°C. Cold-water use only. |
| Connections | 25 mm, 1 inch BSP threaded inlet and outlet. |
| Certifications | UV stage tested for up to 99.9999% E. coli reduction under specified conditions. Product-family information references relevant NSF/ANSI cartridge and AS/NZS testing |
| Recommended For | Whole-home sediment, carbon and UV treatment at flows up to 75 LPM after source-water assessment. |
Trust Signals
Backed by brand credibility, certification and local support
Pentair whole-home system
A packaged multi-stage filtration and UV solution supported through Aquainwent.
Up to 99.9999% E. coli Reduction*
The UV claim applies under the specified test and operating conditions.
75 LPM maximum flow
Designed for medium-to-large whole-home plumbing demand.
Cartridge and UV service support
Plan cartridge replacement, UV lamp service and routine system checks.
Everpure by Pentair systemsFoodservice water applicationsInstallation guidancePan-India service support
Why This Model
When Everpure UV75 makes sense
An integrated whole-home system when the requirement is sediment and carbon treatment plus UV disinfection at up to 75 LPM.
1
Three treatment functions in one assembly
Combines dual-gradient sediment filtration, carbon stages and ultraviolet treatment.
2
Whole-home flow capacity
Designed to serve multiple household taps and appliances within the rated flow.
3
Select by source-water quality
Bore, rain and municipal supplies may require different upstream treatment after testing.
Process
From water check to
From water check to
ongoing support
Share requirement
Water source, test report, household size and simultaneous flow.
Verify fitment
Confirm pressure, temperature, plumbing size, space and upstream treatment.
Install and flush
Connect to the main cold-water line with required isolation and pressure control.
Maintain performance
Replace cartridges and service the UV lamp according to conditions and use.
Customer Confidence
Built for commercial operations teams
Whole-home water treatment
One system supports multiple taps, showers and appliances.
Source-led recommendation
Selection and pretreatment depend on the actual rain, bore or municipal water.
Lifecycle support
Planned cartridge and UV service help maintain treatment performance.
No. UV75 provides sediment filtration, carbon treatment and UV disinfection. Hardness treatment requires a separately selected softener where needed.
The product is positioned for rain, bore or treated municipal supplies, but source-water testing and suitable upstream treatment are required.
The product information states up to 12 months under typical residential conditions. Actual life depends on water quality and usage.
The working pressure is 210–500 kPa, with 25 mm or 1 inch BSP inlet and outlet connections.
The stated reduction applies under specified test conditions. Correct flow, source-water quality, lamp condition and maintenance are necessary.
Planning whole-home filtration and UV treatment?
Share your water source, test report, household demand and plumbing details. Aquainwent will help verify whether UV75 and any required pre-treatment fit the site.
