Everpure QL2 Head + MH2
Product Code
EV306332 + EV961321Helps inhibit scale in coffee equipment.
Replacement: MH2 · EV961321
View ProductCommercial Water Treatment
Select commercial water-treatment products by application, flow, capacity and Product Code.
Need selection help? Contact AquainwentStart here
Compare the approved guide's selection data, then confirm the final fit against site water conditions and equipment demand.
01 / Point of use
Match the application and cartridge to connected equipment and incoming water.
Product Code
EV306332 + EV961321Helps inhibit scale in coffee equipment.
Replacement: MH2 · EV961321
View ProductProduct Code
EV306332 + EV962780Adds minerals to low-TDS water.
Replacement: 4CM · EV962780
View ProductProduct Code
EV932401Reduces chlorine taste and odour.
Replacement: i20002 · EV961222
View ProductProduct Code
EV979750Hydroblend helps inhibit steam scale.
Replacement: 4CB5 / SS-IMF · EV961716 / EV979932
View ProductProduct Code
EV979845Doses scale inhibitor into the water line.
Replacement: SS-IMF · EV979932
View ProductProduct Code
EV306332 + EV969221Reduces chlorine taste and odour.
Replacement: 4FC · EV969221
View ProductCoffee selection / inlet TDS
| Cartridge | Inlet TDS | Maximum cartridge flow |
|---|---|---|
| MH2 | 100–150 ppm | 6.3 L/min |
| 4CM | Below 70 ppm | 1.9 L/min |
Flow figures are cartridge limits. Confirm brewer demand and water conditions before final selection.
02 / Point of entry
Select housing format or tank-based systems against site flow and water conditions.
Product Code
SA10899Automatic backwash pre-filter.
Replacement: SS316 mesh
| Format | Product Code | Flow Rate | Replacement cartridges |
|---|---|---|---|
| 4.5 × 10 in | 655106 + SA10615 | 4 m³/h | SPUN CART EV954210 / CARBON CART 155531-43 |
| 4.5 × 20 in | 655107 + SA10615 | 4 m³/h | SPUN CART 155358-43 / CARBON CART 155783-43 |
| Format | Product Code | Flow Rate | Replacement cartridges |
|---|---|---|---|
| 2.5 × 10 in Black | SA31029 | 2 m³/h | SPUN CART EV954210 / CARBON CART 155531-43 |
| 2.5 × 10 in Translucent | SA21022 | 1.14 m³/h | SPUN CART EV954210 / CARBON CART 155531-43 |
| 2.5 × 20 in Blue | 150069 | 2 m³/h | EC 210 SPUN CART EV953426 / CFB - CARBON CART 255675-43 |
Product Code
103388-SYSProduct Code
10391-SYSProduct Code
CH1665NXT-FILTERProduct Code
CH2472HF-FILTERProduct Code
CH3072HF-FILTERSelect filter media for the site water conditions and treatment duty.
03 / Commercial softening
Select by flow, resin quantity and incoming hardness.
Selection reference
Estimate how much softened water a system can deliver between regenerations using installed resin quantity and measured inlet hardness.
| Softener model | Resin (L) | OBR at 200 ppm (m³) |
|---|---|---|
| HydraSmart Mini | 12 | 3 |
| HydraSmart Midi | 30 | 8 |
| HydraSmart Maxi | 42 | 12 |
| Pentair Fleck SXT 1354 | 75 | 21 |
| Pentair Fleck SXT 1665 | 125 | 34 |
| Pentair Fleck NXT 1665 | 125 | 34 |
| Pentair Fleck Twin 1354 | 150 | 41 |
| Pentair Fleck Twin 1665 | 250 | 69 |
| Pentair Fleck HF 2472 | 350 | 96 |
| Pentair Fleck HF 3072 | 450 | 124 |
Use measured inlet hardness (ppm as CaCO3). Higher hardness reduces water treated between regenerations. Check daily demand and peak flow separately.
Product Code
SA11243Product Code
SA11244Product Code
SA11245Product Code
10387-SYSProduct Code
10390-SYSProduct Code
CH1665NXT-SOFTProduct Code
CH1354TWIN-SOFTProduct Code
CH1665TWIN-SOFTThe brochure describes the Twin systems as alternating tanks with no hard-water bypass during regeneration. Confirm the exact system configuration for an order.
Product Code
CH2472HF-SOFTProduct Code
CH3072HF-SOFTOBR chart references use resin quantity; product cards show the brochure's separate media-capacity figures. For tank, NXT, Twin and high-flow softeners, media is ordered separately as stated in the guide.
04 / Reverse osmosis
Compare production capacity, format and ordering reference.
Product Code
HRO-10011Replacement: Sediment Pre-Filter; Carbon Block Filter; RO Membrane
View Product
MDRO range · shared system view
Wall-mounted commercial RO systems with a shared pre/post filter replacement reference.
Product Code
SA31236 WITH PRE FILTER SETProduct Code
SA31238 WITH PRE FILTER SETShared MDRO range
05 / UV treatment
Compare flow and treatment configuration for commercial UV applications.
Product Code
SA30095Product Code
SA30096Product Code
UV-10003Product Code
SA11284Dealer selection support
Share the application, incoming water conditions and required flow. Aquainwent can help identify the appropriate product configuration and ordering code.
Download the Aquainwent Dealer Product Selection Guide for product codes, selection data and replacement-consumable references.