Chemical-free disinfection
Uses ultraviolet light to sterilise or deactivate bacteria, viruses and other microorganisms without chemical dosing or water wastage
Everpure by Pentair
UV Disinfection
2 GPM & 6 GPM Models
Pentair Everpure Ultraviolet Water Sterilizer Chemical-free final-stage UV disinfection.
A high-intensity ultraviolet disinfection system available in 2 GPM and 6 GPM models for filtered cold water serving drinking, beverage, ice and foodservice applications.
Site assessment
Installation guidance
Genuine cartridge support
AMC planning
Key Benefits
What this system helps you achieve
Stainless-steel chamber
A polished SUS304 chamber and quartz sleeve support UV transmission and hygienic operation.
Operating alarm
Sound-and-light indication helps identify a UV lamp malfunction.
Compact low-power design
Small footprint and low power consumption support final-stage foodservice installations.
Application Fit
Is it suitable for your site?
Best for
- Filtered cold water requiring a final UV disinfection stage
- Drinking-water, beverage, ice and foodservice lines
- PFB-002 applications up to 2 GPM
- PFB-006 applications up to 6 GPM
Check before ordering
- Select PFB-002 or PFB-006 based on required flow
- Recommended source-water temperature: 2–40°C
- Rated pressure up to 0.7 MPa
- Confirm feed-water quality, pre-filtration and the correct NPT connections
| Product Name | Pentair Everpure Ultraviolet Water Sterilizer | Application | Ultraviolet disinfection of filtered cold water for beverage, ice and foodservice applications. |
|---|---|
| Filtration Rating | Not applicable. UV treats microorganisms by light and does not provide particulate filtration. |
| Capacity | Treatment capacity depends on flow and the rated UV lamp life of 9,000 hours. |
| Flow Rate | PFB-002: 2 GPM, approximately 0.45 T/h. PFB-006: 6 GPM, approximately 1.36 T/h. |
| Dimensions | PFB-002: L1 360 mm, L2 260 mm, W 51 mm, H 67 mm. PFB-006: L1 564 mm, L2 454 mm, W 63.5 mm, H 90 mm. |
| Operating Pressure | Rated pressure up to 0.7 MPa; operate within the complete plumbing-system design limits. |
| Operating Temperature | Recommended source-water temperature: 2–40°C. |
| Connections | PFB-002 chamber: 1/2 inch NPT-F. PFB-006 chamber: 3/4 inch NPT-F. Horizontal or vertical installation accepted. |
| Certifications | No certification is explicitly listed on the current product information. Published warranty: one year from installation or 18 months from production, whichever occurs first. |
| Recommended For | Final-stage UV disinfection on suitable pre-filtered cold-water supplies. |
Trust Signals
Backed by brand credibility, certification and local support
Everpure by Pentair channel confidence
Aquainwent is positioned as importer and nationwide distributor in India.
Up to 99.99% UV disinfection*
Performance depends on flow, UV dose and suitable source-water conditions
Published limited warranty
One year from installation or 18 months from production, whichever occurs first.
Lamp and quartz-sleeve support
Plan lamp replacement and quartz-sleeve inspection or cleaning around operating conditions.
Everpure by Pentair systemsFoodservice water applicationsInstallation guidancePan-India service support
Why This Model
When the Everpure UV Sterilizer makes sense
A compact final disinfection barrier when the water is already filtered and the requirement is microbiological treatment without chemical dosing.
1
Two flow options
Choose the 2 GPM or 6 GPM model according to the required service flow.
2
No chemical residual
UV treatment adds no disinfectant chemical and does not intentionally change taste or odour.
3
Requires suitable pre-treated water
UV is not a sediment filter; source-water quality and pre-filtration directly affect performance.
Process
From water check to
From water check to
ongoing support
Share requirement
Water source, microbiological concern, flow demand and application points.
Verify fitment
Confirm pre-filtration, pressure, temperature, port size and mounting.
Install correctly
Mount horizontally or vertically according to the approved technical instructions.
Maintain performance
Replace the lamp and inspect or clean the quartz sleeve as required.
Customer Confidence
Built for commercial operations teams
Chemical-free safety barrier
Adds UV disinfection without chemical dosing or water wastage.
Flow-led model selection
Choose between 2 GPM and 6 GPM based on actual demand.
Lifecycle support
Lamp, sleeve and operating checks support dependable UV performance.
No. UV inactivates microorganisms using light; it does not replace sediment filtration, carbon treatment, softening or RO.
Use the required service flow and plumbing design to select PFB-002 at 2 GPM or PFB-006 at 6 GPM.
The published lamp life is 9,000 hours. Actual service planning should follow operating hours and the approved maintenance instructions.
The source water must meet the recommended quality and temperature conditions, and appropriate pre-filtration is required for reliable UV transmission.
The current product information does not explicitly list a certification. Use the approved datasheet and warranty documents for final technical confirmation.
Need to select the correct UV flow and pre-treatment?
Share your source-water quality, required flow and application. Aquainwent will help verify the suitable UV model and upstream treatment.
