Chemical-free disinfection
Uses ultraviolet light to sterilise or deactivate bacteria, viruses and other microorganisms without chemical dosing or water wastage.
Pentair
UV Disinfection
25 W UV Lamp
Pentair UV900 Intelligent UV Water Disinfection System 900 LPH chemical-free disinfection.
A commercial ultraviolet water disinfection system for restaurants, canteens, hotel kitchens, institutions and beverage points that need a chemical-free final safety barrier with integrated pre-filtration.
Site assessment
Installation guidance
Genuine cartridge support
AMC planning
Key Benefits
What this system helps you achieve
Integrated pre-treatment
A 20-inch combination cartridge helps remove suspended particles and reduce chlorine, bad taste, colour and odour before UV exposure.
Food-grade construction
FDA-approved food-grade wetted materials and an electro-polished stainless-steel UV chamber support hygienic commercial operation.
Visible operating status
LED indication helps confirm UV-lamp operation, while the 25 W lamp and low energy demand support routine foodservice use.
Application Fit
Is it suitable for your site?
Best for
- Restaurants, canteens and hotel kitchens requiring a final UV safety stage
- School, college, institutional and nursing-home foodservice points
- Soft-drink, coffee, tea and other beverage-vending applications
- Pre-filtered commercial water requiring up to 900 LPH UV treatment
Check before ordering
- Maximum operating pressure: 65 psi
- Maximum inlet-water temperature: 45°C
- Electrical supply: 220 V AC, 50 Hz with 1 A fuse
- Provide 3/4-inch connections; brackish, saline or very hard water may require RO or softening first
| Product Name | Pentair UV900 Intelligent UV Water Disinfection System | Application | Ultraviolet disinfection for pre-filtered water in restaurants, canteens, hotel kitchens, institutions and beverage-vending applications. |
|---|---|
| UV Lamp | High-performance 25 W UV lamp. |
| Pre-Treatment | 20-inch speciality combination cartridge with approximately 5-micron rating for suspended particles, chlorine, taste, colour and odour reduction. |
| Maximum Flow Rate | 900 LPH. |
| Lamp Life | Approximately 8,000 hours. |
| Rated Voltage | 220 V AC, 50 Hz. |
| Fuse | 1 amp. |
| Operating Pressure | Maximum 65 psi. |
| Operating Temperature | Maximum inlet-water temperature: 45°C. |
| Connections | 3/4-inch inlet and outlet. |
| UV Chamber | Electro-polished stainless-steel chamber designed to improve UV-dose efficiency through its mirror-finish surface. |
| Food-Contact Materials | FDA-approved food-grade wetted components as specified by Pentair. |
| Testing | Tested successfully according to Indian standards for UV purifiers at 900 LPH. |
| Power Consumption | Approximately 50 watts to draw 1,000 litres of water, as listed in the product brochure. |
| Recommended For | Commercial foodservice applications using UV as a final disinfection stage on suitably pre-treated water. |
Trust Signals
Backed by brand credibility, certification and local support
Pentair system confidence
UV900 is a Pentair commercial water-disinfection system supported in India through Aquainwent.
Tested at 900 LPH
The product brochure states successful testing according to Indian standards for UV purifiers at 900 LPH.
Food-grade wetted components
FDA-approved food-grade materials and an electro-polished stainless-steel chamber support hygienic water contact.
Lamp and pre-filter support
Supports planned 8,000-hour UV-lamp replacement and 20-inch pre-filter maintenance.
Everpure by Pentair systemsFoodservice water applicationsInstallation guidancePan-India service support
Why This Model
When Pentair UV900 makes sense
A foodservice UV system for sites that need a 900 LPH chemical-free disinfection barrier with integrated sediment, chlorine, taste, colour and odour pre-treatment.
1
Final safety stage without chemical dosingUV treatment sterilises or deactivates microorganisms without adding chemicals, residual taste or process complexity.
2
Foodservice-sized 900 LPH outputSuitable for kitchens, canteens, institutions and beverage points where a higher commercial flow is required.
3
Pre-filter plus UV in one coordinated systemThe 20-inch combination cartridge prepares water before it reaches the 25 W UV lamp and stainless-steel chamber.
ProcessFrom water check to
From water check to
ongoing support
Share requirement
Water source, microbiological concern, flow demand and application points.
Verify feed-water fit
Review turbidity, hardness, salinity, pressure, temperature and pre-treatment needs.
Install correctly
Coordinate the 20-inch pre-filter, UV reactor, electrical supply and plumbing arrangement.
Maintain performance
Plan cartridge replacement, quartz cleaning and UV-lamp replacement around actual operating hours.
Customer Confidence
Built for commercial operations teams
Chemical-free safety barrier
Adds UV disinfection without chemical dosing or water wastage.
Fitment-led recommendation
Selection is checked against feed-water quality, pressure, flow and upstream treatment.
Lifecycle support
Planned lamp and pre-filter servicing help maintain dependable operation.
Pricing depends on feed-water quality, upstream treatment, installation conditions, electrical work and service scope. A fitment review is required before quotation.
No. UV900 provides microbiological disinfection and pre-filtration. Brackish, saline or very hard water may require reverse osmosis or softening before UV treatment.
The product brochure lists an approximate lamp life of 8,000 hours. Replacement should be planned by operating hours and verified lamp performance.
The system uses a 20-inch speciality combination cartridge with an approximate 5-micron rating to reduce suspended particles, chlorine, bad taste, colour and odour before UV treatment.
Share peak flow, daily demand, water source, pressure and application points. Aquainwent can verify whether UV900 or another UV configuration is appropriate.
Not sure if Pentair UV900 is the right UV capacity for your site?
Share your water source, peak flow, microbiological concern and application details. Aquainwent will help verify the correct pre-treatment and UV configuration.
